STEP 1: LIFT THE BLADE HOLDER AT THE END OF THE RAZOR

STEP 2: SEPARATE THE TWO METAL SECTIONS OF THE RAZOR BY PULLING THEM APART AND SLIDING THEM IN OPPOSITE DIRECTIONS

STEP 3: TAKE A DOUBLE EDGE RAZOR BLADE AND HOLD IT FROM UNDERNEATH WHILST IN THE PROTECTIVE PACKAGING.

THEN FOLD THE SIDES UPWARDS SO THE TWO BLADE EDGES BEND TOWARDS EACH OTHER. KEEP BENDING UNTIL THE BLADE SNAPS IN HALF.

STEP 4: FIT ONE HALF OF THE BLADE OVER THE TWO GUIDE PINS ON THE LOWER METAL SECTION.

STEP 5: SLIDE THE HIGHER METAL SECTION BACK ON TOP TO ALIGN WITH THE PINS

STEP 6: SLIDE THE BLADE HOLDER BACK TO HOLD EVERYTHING TOGETHER